Kia Optima: Rear combination lamp. Repair procedures

Installation

1. Install the high mounted stop lamp to the rear package tray. 2. Install the rear package tray trim. 3. Install the rear seat. ...

Removal

Rear Combination lamp (Outside) 1. Disconnect the negative (-) battery terminal. 2. Remove the rear combination lamp cover (A). 3. Replace the ...

See also:

Tightening Torques
Item kgf.m N.m lb-ft Positive crankcase ventilation valve installation 0.19 ~ 0.29 1.9 ~ 2.8 1.4 ~ 2.1 ...

Inspection
Measuring Resistance 1. Disconnect the cruise control switch connector from the control switch. 2. Measure resistance between terminals on the con ...

Installation
1. Installation is the reverse of removal. Make sure vehicle does not roll before setting room sid ...