Kia Optima: Power outlet
The power outlet is designed to provide power for mobile telephones or other devices designed to operate with vehicle electrical systems. The devices should draw less than 10 amps with the engine running.
CAUTION
- Use the power outlet only when the engine is running and remove the accessory plug after use. Using the accessory plug for prolonged periods of time with the engine off could cause the battery to discharge.
- Only use 12V electric accessories which are less than 10A in electric capacity.
- Adjust the air-conditioner or heater to the lowest operating level when using the power outlet.
- Close the cover when not in use.
- Some electronic devices can cause electronic interference when plugged into a vehicle’s power outlet. These devices may cause excessive audio static and malfunctions in other electronic systems or devices used in your vehicle.
WARNING
Do not put a finger or a foreign element (pin, etc.) into a power outlet and do not touch with a wet hand. You may get an electric shock.
Sunvisor
Use the sunvisor to shield direct light through the front or side windows.
To use the sunvisor, pull it downward. To use the sunvisor for the side window,
pull it downward, unsnap it from the bra ...
Digital clock
Type A
Type B
WARNING
Do not adjust the clock while driving. You may lose your steering control and
cause severe personal injury or accidents.
Whenever the battery terminals or related fuse ...
See also:
Ambient Sensor. Description and Operation
Description
1.
The ambient temperature sensor
is located at the front of the condenser and detects ambient air temperature.
It is a negative type thermistor; resistance will increas ...
How the Driver’s Air Bags (SRS) Work
The driver’s air bags are stored in the steering wheel hub. The passenger’s air
bag is stored in the dashboard above the glove box.
In certain frontal collisions, your air bags will instantly infla ...
SS-B Solenoid Valve(ON/OFF). Description and Operation
Description
SS-B solenoid valve is attached to the valve body and is an on/off solenoid valve
that is used to change gears. SS-B Solenoid valve(ON/OFF) is installed at valve
body.
...