Kia Optima Manuals

Kia Optima: Passenger Airbag (PAB) Module. Description and Operation - Airbag Module - Restraint - Kia Optima TF 2011-2024 Service ManualKia Optima: Passenger Airbag (PAB) Module. Description and Operation

Description

The passenger airbag (PAB) is installed inside the crash pad and protects the front passenger in the event of a frontal crash. The SRSCM determines if and when to deploy the PAB.
Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury.

Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable from battery and wait for at least three minutes before beginning work. ...

Passenger Airbag (PAB) Module. Components and Components Location
Components ...

See also:

Installation
Front Speaker 1. Install the front speaker. 2. Install the front door trim. Rear Speaker 1. Install the rear speaker. 2. Install the rear door t ...

ECM Problem Inspection Procedure
1. TEST ECM GROUND CIRCUIT: Measure resistance between ECM and chassis ground using the backside of ECM harness connector as ECM side check point. If the problem is found, repa ...

To resume cruising speed at more than approximately 40 km/h (25 mph)
If any method other than the cruise ON/OFF switch was used to cancel cruising speed and the system is still activated, the most recent set speed will automatically resume when the RES+ switch is ...

Categories

Kia Optima Manuals


Copyright © www.kiopman.com 2024