Kia Optima: Output Speed Sensor. Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Optima TF 2011-2022 Service ManualKia Optima: Output Speed Sensor. Specifications

Specifications

▷ Type: Hall effect sensor

Operation condition [°C(°F)]
((-)40~150)) -40~302
Air gap(mm)in.
(0.55~1) 0.0217~0.0394
Output voltage
High
1.18~1.68
Low
0.59~0.84


Output Speed Sensor. Description and Operation
Description The output speed sensor is a vital unit that measures the rate of rotation of the transaxle's turbine shaft and output shaft, and delivers the readings to the TCM. The sensor prov ...

Output Speed Sensor. Schematic Diagrams
Circuit Diagram ...

See also:

Cruise Control Switch Repair procedures
Removal and Installation 1. Disconnect the battery negative terminal. Tightening torque : 4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft) 2. Remove the driver airbag module. (Refer to the ...

Tire Rotation
To equalize tread wear, it is recommended that the tires be rotated every 7,500 miles (12000 km) or sooner if irregular wear develops. During rotation, check the tires for correct balance. When ro ...

Components and Components Location
Component Location [Vehicle Installation component] 1. Automatic transaxle2. Transaxle control module (TCM)3. Shift lever4. Data Link Connector (DLC) [Transaxle Installation component] 1. ...

Copyright © www.kiopman.com 2022