Kia Optima: Removal
|
| 1. | Turn ignition switch OFF and disconnect the negative (-) battery cable. |
| 2. |
Disconnect the ECM Connector (A).
|
| 3. | Remove the air cleaner assembly (Refer to "Intake And Exhaust System" in EM group). |
| 4. |
Remove the mounting bolts (A) and nut (B), and then
remove the ECM assembly (C).
|
| 5. |
Remove the installation nuts (A) and screw (B), and
then remove the ECM (C) from the bracket.
|
Installation
In the case of the vehicle equipped with immobilizer
or button engine start system, perform "Key Teaching" procedure together
...
See also:
35R Clutch Control Solenoid Valve(35R/C_VFS). Description and Operation
Description
35R clutch control solenoid valve(35R/C_VFS) is attached to the valve body. This
variable force solenoid valve directly controls the hydraulic pressure inside the
35R clutch.
...
Components and Components Location
Component Location
1. Horn switch
2. Horn relay (Engine room compartment)
3. Clock spring
4. Horn (Low)
5. Horn (High)
...
Components and Components Location
Component Location
1. BCM
2. Ultrasonic sensor
3. Buzzer
※ Rear parking assist control unit function and buzzer are built in BCM
(bod ...
Categories
Kia Optima Manuals
- Kia Optima DL3 2019-2025 Owners Manual
- Kia Optima DL3 2019-2025 Service and Repair Manual
- Kia Optima TF 2011-{2019} Owners Manual
- Kia Optima TF 2011-2025 Service Manual
- Kia Optima MS/Magentis 2000-2005 Owners Manual
Copyright www.kiopman.com 2025