Inspection
Armature Inspection
And Test
1.
Remove the starter.
2.
Disassemble the starter as shown at the beginning
of this procedure.
...
Erasing Programmed Buttons
To erase the three HomeLink buttons, press and hold the two outside buttons until
the indicator light begins to flash (after 20 seconds). Release both buttons.
Individual buttons cannot be erased ...
Hazardous Driving Conditions
When hazardous driving conditions are encountered such as water, snow, ice, mud,
sand, or similar hazards, follow these suggestions:
Drive cautiously and allow extra distance for braking.
Avoi ...