The lights are switched ON or OFF by pressing the corresponding switches.
Inspection
1.
Turn the ignition switch OFF.
2.
Remove the ECTS (Refer to "Removal").
3.
After immersing the thermistor of the sensor into
engi ...
Mode Control Actuator. Description and Operation
Description
The mode control actuator is located at the heater unit.It adjusts position of
mode door by operating mode control actuator based on signal of A/C control unit.
Pressing mode select s ...
Description and Operation
Description
Automatic transaxle system relies on various measurement data
to determine the current control status and extrapolate the necessary
compensation values. These values are used to con ...