Kia Optima: Lubricants and Fluids

Changing the Automatic Transaxle Fluid

1. Raise and suitably support the vehicle. 2. Remove the drain plug located at the bottom center front of the transaxle pan. 3. After the oil has drained, completely install a new washer on the plug ...

Checking the Washer Fluid Level

The reservoir is translucent so that you can check the level with a quick visual inspection. Check the fluid level in the washer fluid reservoir and add fluid if necessary. Plain water may be u ...

See also:

Inspection
1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to “Wave Form� ...

Inspection
1. Check the driveshaft boots for damage and deterioration. 2. Check the driveshaft spline for wear or damage. 3. Check that there is no water or ...

Description and Operation
OBD-II review 1. OverviewThe California Air Resources Board (CARB) began regulation of On Board Diagnostics (OBD) for vehicles sold in California beginning with the 1988 model year. The first ...