Kia Optima: Installation
| 1. |
Reassemble the steering wheel
remote control switch after connecting the connector. |
| 2. |
Reassemble the steering wheel. |
| 3. |
Reassemble the driver airbag
module.
|
Make sure the audio remote control switch and the airbag module
connectors are plugged in properly. |
|
1.
Disconnect the negative (-) battery
terminal.
2.
Remove the driver airbag module.
(Refer to the RT group)
3.
Remove the steering wheel.
(Refe ...
See also:
Removal
1.
Disconnect the battery negative
cable, and wait for at least three minutes before beginning work.
2.
Remove the front seat assembly.
(Refer to the Body group- Fron ...
Inspection
1.
Disconnect the ignition switch
connector (A) and key warning switch connector (B) from the steering column.
2.
Check for continuity between
the ter ...
Repair
procedures
Starter Circuit Troubleshooting
The battery must be in good condition and fully charged.
1.
Disconnect the fuel ...