Driver Door Lock Switch Inspection
1. | Disconnect the negative (-) battery terminal. |
2. | Remove the front door trim panel. (Refer to the BD group - "Front door") |
3. | Disconnect the connector from
the power window switch module.
|
4. | Check for continuity between
the terminals in each switch position according to the table.
|
Reassembly
1.
Reassemble the CVVT assembly
(A) and camshaft (B).
Tightening torque :53.9
~ 63.7N.m (5.5 ~ 6.5kgf.m, 39.7 ~ 47.0lb-ft)
...
Removal
1.
Disconnect the negative (-) battery
terminal.
2.
Remove the auto light sensor
(A) from crash pad upper side by using screw (-) driver.
...
Engine Mounting. Components and Components Location
1. Transaxle mounting bracket
2. Roll rod bracket
3. Sub frame
4. Engine mounting bracket
5. Engine mounting support bracket
...