If the engine stalls at a crossroad or crossing, set the shift lever in the N (Neutral) position and then push the vehicle to a safe place.
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Disconnect the EWGA connector (A).
3.
Remove the shaft ...
Inspection
1.
Check that the red light flickers
when the door lock or unlock button is pressed on the transmitter.
2.
Remove the battery (A) and check
voltage if the red light d ...
Front Hub / Knuckle. Components and Components Location
Components
1. Driveshaft nut
2. Brake disc
3. Hub
4. Wheel bearing
5. Snap ring
6. Dust cover
7. Knuckle
8. Driveshaft
...