Kia Optima: Heating and Cooling System Off

Recirculated Air position

When the air intake control switch is depressed (switch indicator illuminates), almost all outside air flow into the vehicle is shut off and air inside the vehicle is recirculated. This position ...

Air Flow Control (Mode Switch)

The mode selection button controls the direction of the air flow through the ventilation system. The air flow outlet port is same as manual climate control system. Face position Air flow is dir ...

See also:

If engine turns over normally but does not start
1. Check fuel level. 2. With the ignition switch in the LOCK position, check all connectors at the ignition coil and spark plugs. Reconnect any that may be disconnected or loose. 3. Check th ...

Function
Function RequirementsThe BCM controls IPS and relay on the SJB. For example, if BCM requests head lamp low beam control, then BCM requests related lamp control at one time. Signal Flow DiagramThi ...

Components and Components Location
  1. Piston ring 2. Snap ring 3. Piston 4. Connecting rod 5. Connecting rod upper bearing 6. Piston pin 7. Connecting rod lower bearing 8. Connecting ...