Inspection
1. | Turn ignition switch OFF and disconnect the negative (-) battery cable. |
2. | Remove the crash pad side switch
assembly.
|
3. | Check the continuity between
the switch terminals as the ESC OFF switch is engaged.
|
Electric WGT Control Actuator. Specifications
Specification
[EWGA Position Sensor]
Position
Output Voltage[V]
Operating Angle[°]
Range of Rod [mm], reference
Mechanical Close end ...
Schematic Diagrams
Schematic Diagram
...
Installation
1.
Installation is the reverse of
removal.
2.
After installation, bleed the
brake system. (Refer to Brake system bleeding)
...