Specifications
Specifications
Ignition System
Items
Specifications
Ignition coil
Primary resistance
0.62 ± 10 % (Ω)
Secondary resis ...
ECM Problem Inspection Procedure
1.
TEST ECM GROUND CIRCUIT: Measure resistance between
ECM and chassis ground using the backside of ECM harness connector as
ECM side check point. If the problem is found, repa ...
Removal and Installation
1.
Disconnect the ignition coil connectors (A).
2.
Remove the ignition coils (A).
Tightening torque
:3.9 ~ 5.9N.m (0.4 ~ 0.6kgf.m, 2. ...