Avoid driving through flooded areas unless you are sure the water is no higher than the bottom of the wheel hub. Drive through any water slowly. Allow adequate stopping distance because brake performance may be affected.
After driving through water, dry the brakes by gently applying them several times while the vehicle is moving slowly.
Installation
1.
Install the multimedia jack.
2.
Connect the multimedia jack connector.
3.
Install the console upper cover.
4.
Install the shift lever knob. ...
Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove wheel nuts, rear wheel
and tire from rear hub.
Ti ...
Inspection
1.
Measure the output voltage between
the terminal of the wheel speed sensor and the body ground.
...