Kia Optima: Driver position memory system
A driver position memory system is provided to store and recall the driver seat position with a simple button operation. By saving the desired position into the system memory, different drivers can reposition the driver seat based upon their driving preference. If the battery is disconnected, the position memory will be lost and the driving position should be restored in the system.
WARNING
Never attempt to operate the driver position memory system while the vehicle is moving.
This could result in loss of control, and an accident causing death, serious injury, or property damage.
Resetting the sunroof
Whenever the vehicle battery is disconnected or discharged, or related fuse is
blown, you must reset your sunroof system as follows:
1.Turn the ignition switch to the ON position and close the sunr ...
Storing positions into memory using the buttons on the door
Storing driver’s seat positions
1. Shift the shift lever into P while the ignition switch is ON. 2. Adjust
the driver seat to position comfortable for the driver. 3. Press SET button on
the contr ...
See also:
Checking the engine oil level
2.4 engine
2.0 engine
1. Be sure the vehicle is on level ground.
2. Start the engine and allow it to reach
normal operating temperature.
3. Turn the engine off and wait for a few
min ...
Keyless Entry System
You can also lock or unlock the door and open the trunk from outside with the
keyless transmitter.
• To lock the
door, press this button once. (Hazard flasher lights are turned on once for ...
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Disconnect the engine coolant temperature sensor
connector (A).
...