Kia Optima: Components and Components Location

Repair procedures

Component Replacement After Deployment Before doing any SRS repairs, use the GDS Pro to check for DTCs. Refer to the Diagnostic Trou ...

Components

1. Driver Airbag (DAB) 2. Steering Wheel 3. Clock Spring 4. Seat Belt Pretensioner (BPT) 5. Pressure Side Impact Sensor (P-SIS) 6. Side Impact Sensor (SIS) 7. Side A ...

See also:

Vehicle break-in process
No special break-in period is needed. By following a few simple precautions for the first 1,000 km (600 miles) you may add to the performance, economy and life of your vehicle. Do not race the ...

Inspection (With GDS)
1. Check BCM input/output specification of multifunction switch using the GDS. If the specification is abnormal, replace the lamp or wiper switch. 2. If diagnosis is ...

Line Pressure Control Solenoid Vale. Specifications
Specifications Direct control VFS[LINE Pressure]▷ Control type : Normal low type Control Pressure kpa(kgf/cm², psi) 500.14~9.81(5.1~0.1,72.54~1.42) ...