Kia Optima: Care of discs
- If the temperature inside the vehicle is too high, open the vehicle windows
for ventilation before using your vehicle audio.
- It is illegal to copy and use MP3/WMA files without permission. Use CDs
that are created only by lawful means.
- Do not apply volatile agents such as benzene and thinner, normal cleaners
and magnetic sprays made for analogue disc onto CDs.
- To prevent the disc surface from getting damaged. Hold and carry CDs by
the edges or the edges of the center hole only.
- Clean the disc surface with a piece of soft cloth before playback (wipe
it from the center to the outside edge).
- Do not damage the disc surface or attach pieces of sticky tape or paper
onto it.
- Make sure objects other than CDs are not inserted into the CD player (Do
not insert more than one CD at a time).
- Keep CDs in their cases after use to protect them from scratches or dirt.
- Depending on the type of CD-R/CDRW CDs, certain CDs may not operate normally
according to manufacturing companies or making and recording methods. In such
circumstances, if you still continue to use those CDs, they may cause the malfunction
of your vehicle audio system.
✽ NOTICE - Playing an Incompatible Copy Protected Audio CD
Some copy protected CDs, which do not comply with the international audio CD
standards (Red Book), may not play on your vehicle audio. Please note that if you
try to play copy protected CDs and the CD player does not perform correctly the
CDs maybe defective, not the CD player.
Satellite radio reception You may experience difficulties in receiving SIRIUS®
satellite radio signals in the following situations.
If you are driving in a tunnel or a covered parking area.
...
❋There will be no logo if the Bluetooth® wireless technology feature is not supported. ...
See also:
Fan speed control
The fan speed can be set to the desired speed by pressing the fan speed control
switch.
To change the fan speed press the
part of the switch for higher speed
or press the part of the switch ...
BCM Connector Terminals
BCM Input Signal SPEC
Signal Name
Description
Input Characteristics
(determinant condition
of connector base)
Power
Source
(Pull Up)
...
Headrest
The rear seat(s) is equipped with headrests in the outboard seating positions
for the occupant's safety and comfort.
The headrest not only provides comfort for passengers, but also helps prot ...