Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the RCV control solenoid valve connector.
3.
Measure resistance between the valve terminals 1
...
Yaw-rate and Lateral G Sensor. Repair procedures
Removal
1.
Turn ignition switch OFF and
disconnect the negative (-) battery cable.
2.
Remove the floor console. (Refer
to the Body group - Console)
3.
...
Installation
1.
Installation is the reverse of
removal.
2.
Tighten the HECU mounting bolts
and nuts to the specified torque.
3.
After installation, bleed the
b ...