Kia Optima: BCM (Body Control Module)

Transmitter Code Registration (Using GDS)

1. Connect the DLC cable of GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on GDS. 2. Select the vehicle model ...

Body Control Module (BCM). Specifications

Specifications Items Specifications Rated voltage DC 12V Operating voltage DC 9 ~ 16V Operating temper ...

See also:

Power Door Mirror Actuator. Repair procedures
Inspection 1. Remove the front door quadrant delta cover.(Refer to the BD group - "Front door") 2. Disconnect the power door mirror connector from the ...

Installation
1. Install the balance shaft chain. (Refer to Lubrication system in this group) 2. Install the crankshaft chain sprocket (B) and the timing chain oil jet (A). ...

Trailing Arm. Repair procedures
Replacement 1. Remove the rear wheel & tire. Tightening torque:88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...