Kia Optima: Anchor Pretensioner (APT). Description and Operation - Seat Belt Pretensioner - Restraint - Kia Optima TF 2011-2025 Service ManualKia Optima: Anchor Pretensioner (APT). Description and Operation

Description

Front seat belt anchor pretensioner operates as well as belt pretensioner at the same time If it gets into its deploy condition after a collision. It is located at near anchor on front seat and it is an equipment to make up for the existing short stroke. Front seat belt anchor pretensioner is supported by two cables and it is an auxiliary equipment to prevent the driver and passenger from breaking away doubly as seat belt is being pulled toward anchor side after a collision.
Never measure resistance of anchor pretensioner directly, current of measuring device may cause unexpected airbag deploy.

Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes. 3. Install the seat belt ...

Anchor Pretensioner (APT). Components and Components Location
Components ...

See also:

Hazard Warning Flasher
The hazard warning flasher causes the rear tail lights and front turn signal lights to flash on and off, which serves as a warning to other drivers to exercise caution when approaching or passin ...

Overdrive Clutch Control Solenoid Valve(OD/C_VFS). Schematic Diagrams
Circuit Diagram ...

Windshield Wipers
The ignition switch must be ON. To turn the wipers on, move the lever down. INT – Intermittent wiper operation LO – Normal wiper speed HI – Fast wiper speed ...

Copyright www.kiopman.com 2025