Kia Optima: Wheel Replacement
When replacing the metal wheels for any reason, make sure the new wheels are equivalent to the original factory units in diameter, rim width and offset.
WARNING
A wheel that is not the correct size may adversely affect wheel and bearing life, braking and stopping abilities, handling characteristics, ground clearance, bodyto- tire clearance, snow chain clearance, speedometer calibration, headlight aim and bumper height.
Wheel Alignment and Tire Balance
The wheels on your vehicle were aligned and balanced carefully at the factory
to give you the longest tire life and best overall performance.
In most cases, you will not need to have your wheels al ...
Tire Size Designation
A tire’s sidewall is marked with a tire size designation. You will need this
information when selecting replacement tires for your car. The following explains
what the letters and numbers in the ...
See also:
Inspection
1.
Check the hub for cracks and
the splines for wear.
2.
Check the brake disc for scoring
and damage.
3.
Check the rear axle carrier for
cracks.
...
TPMS Sensor. Description and Operation
Description
1.
Mode
(1)
Configuration State
A.
All sensors should
be in the Low Line state.
B.
In Low ...
Oil Pressure Switch. Repair procedures
Inspection
1.
Check the continuity between
the terminal and the body with an ohmmeter.If there is no continuity,
replace the oil pressure switch.
2.
Ch ...
Categories
Kia Optima Manuals
- Kia Optima DL3 2019-2026 Owners Manual
- Kia Optima DL3 2019-2026 Service and Repair Manual
- Kia Optima TF 2011-{2019} Owners Manual
- Kia Optima TF 2011-2026 Service Manual
- Kia Optima MS/Magentis 2000-2005 Owners Manual
