Kia Optima: Valve Body. Description and Operation - Hydraulic System - Automatic Transaxle System - Kia Optima TF 2011-2026 Service ManualKia Optima: Valve Body. Description and Operation

Description

The valve body is essential to automatic transaxle control and consists of various valves used to control the oil feed from the oil pump. Specifically, these valves consist of pressure regulator valves, oil redirection valves, shift valves, and manual valves. The body also features electronic solenoid valves that ensure smooth gear changes.


Replacement
ATF of 6 speed automatic transaxle doesn’t need to be replaced. If the vehicle is used severely in business or personal use, replac ...

Valve Body. Components and Components Location
Components Location 1. PCV adjust screw 2. Solenoid valve 3. Oil temperature sensor 4. Accumulator 5. Low & reverse brake(LR/B) pressure flow hole 6. Under ...

See also:

Inspection
1. Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that there is the plunger movement. ...

Teaching Procedures
1. Key Teaching ProcedureKey teaching must be done after replacing a defective PCM(ECM) or when providing additional keys to the vehicle owner. The procedure starts with an PC ...

Anti-Lock Brake System (ABS) Warning Light
This light illuminates when you start the engine. The light will go off if the ABS is operating normally. Also, this light comes on if the key is turned to ON, and then goes off in 2-3 seconds i ...

Copyright www.kiopman.com 2026