Kia Optima: TCS ON/OFF MODE
In the TCS ON mode, the indicator in the instrument cluster will not be illuminated.
The indicator will illuminate when the ignition key is turned to the “ON” position, but should go off after 3 seconds. It means the TCS is in the stand-by status and at the moment of the actual operation of the TCS, the indicator will blink.
To switch to TCS OFF mode, press the TCS switch. System will be deactivated and the TCS indicator in the instrument cluster will illuminate.
If the TCS indicator stays on in the TCS ON mode, take your car to your Authorized Kia Dealer and have the system checked.
✽ NOTICE
- Stop the engine once. Then restart the engine, and the TCS mode will automatically turn ON.
- When the traction control is operating properly, you can feel a slight pulsation in the vehicle. This is only the effect of brake control and indicates nothing unusual.
- When the engine starts, a click is heard from the engine compartment; however, this is only the sound of traction control being checked.
- When moving out of the mud or fresh snow, pressing the accelerator pedal may not cause the engine speed to increase.
Traction Control System
On slippery road surfaces, the traction control system (TCS) limits the drive
wheels from spinning excessively, thus helping the car to accelerate. It also provides
improved driving force and st ...
See also:
Anti-Lock Brake System (ABS) Warning Light
This light illuminates
when you start the engine. The light will go off if the ABS is operating normally.
Also, this light comes on if the key is turned to ON, and then goes off in 2-3 seconds
i ...
Components(2)
1. Rear bumper cover
2. Rear reflector
3. Rear bumper lower cover
4. Rear bumper energy absorber
5. Wiring harness
6. Rear bumper beam assembly
...
To defrost outside windshield
1. Set the mode selection switch to the
position.
When you select position, the system
automatically turns on the outside (fresh) air mode.
2. Set the temperature control knob to the extreme ...