Kia Optima: Side Impact Sensor (SIS). Components and Components Location - SRSCM - Restraint - Kia Optima TF 2011-2019 Service ManualKia Optima: Side Impact Sensor (SIS). Components and Components Location

Components


Side Impact Sensor (SIS). Description and Operation
Description Side Impact Sensor (SIS) system consists of two P-SIS which are installed at each center of the front door module (LH and RH) and two SIS which are installed at each center pillar nea ...

Side Impact Sensor (SIS). Repair procedures
...

See also:

Disassembly
1. Remove the alternator cover (A) using a screw driver after loosening the nuts (B). 2. Remove the slip ring guide (A) and then loosen the ...

Removal
[Without EPB] 1. Remove the rear wheel & tire. Tightening torque:88.3 ~107.9 N.m(9.0 ~11.0 kgf.m, 65.1 ~79.6 lb-ft) 2. Rem ...

Installation
1. Installation is reverse of removal. Filler-neck assembly bracket installation bolt : 3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft) Filler-neck as ...

Copyright © www.kiopman.com 2019