Schematic Diagram
To fasten the front lap/shoulder belt
1. Grasp the buckle and tongue plate.
2. Slowly pull the lap/shoulder belt out from the retractor.
3. Insert the tongue plate into the open end of the buckle until an audible “click”
is heard, ...
The Other Fuses And Relays Component. Repair procedures
Inspection
Power Relay Test (Type B)Check for continuity between the terminals.
A : Two turn unlock relay
1.
There should be continuity between
the No.30 and No.87 terminals when power ...
Steering Gear box Repair procedures
Replacement
1.
Remove the front wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
Be careful not to damage to the hub ...