1. | Loosen the drain plug, and drain the coolant. Remove the radiator cap to speed draining. |
2. | Disconnect the oil cooler coolant
hoses (A).
|
3. | Remove the oil filter (A).
|
4. | Loosen the mounting bolt (A)
and remove the oil cooler assembly (B).
|
Reprogramming a Single HomeLink Button
To program a device to HomeLink using a HomeLink button previously trained, follow
these steps:
1. Press and hold the desired HomeLink button. Do not release until step 4 has
been completed.
2. ...
Crash Pad. Components and Components Location
Components
1. Main crash pad assembly
2. Side speaker grille [LH]
3. Airbag blanking cover
4. Side speaker grille [RH]
5. Center speaker grille
6. Crash pad side cover [ ...
Windshield wipers
Operates as follows when the ignition switch is turned ON.
MIST : For a single wiping cycle, push the lever upward and release it with the
lever in the OFF position. The wipers will operate conti ...