Kia Optima: Rear Disc Brake. Repair procedures

Components (With EPB)

1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Brake pad 6. Pad retainer ...

Removal

[Without EPB] 1. Remove the rear wheel & tire. Tightening torque:88.3 ~107.9 N.m(9.0 ~11.0 kgf.m, 65.1 ~79.6 lb-ft) 2. Rem ...

See also:

ENGINE START/STOP button position
OFF Not illuminated • With automatic transaxle To turn off the engine (START/RUN position) or vehicle power (ON position), press the ENGINE START/STOP button with the shift lever in the P (Park ...

Removal
• DON’T remove the camshaft position sensor while the engine is running or right after engine is turned of ...

Reprogramming a Single HomeLink Button
To program a device to HomeLink using a HomeLink button previously trained, follow these steps: 1. Press and hold the desired HomeLink button. Do not release until step 4 has been completed. 2. ...