Kia Optima: Rail Pressure Sensor (RPS). Schematic Diagrams

Rail Pressure Sensor (RPS). Troubleshooting

Rail Pressure Sensor (RPS). Repair procedures

See also:

Installation
1. Install the wiper motor. 2. Install the crank arm. Tighting torque:24.5 ~ 26.4Nm (2.5 ~ 2.7, kgf.m, 18.0 ~ 19.5 lbf.ft) ...

Delivery Pipe Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal. 2. Release the residual pressure in fuel line (Refer to “Release Residual Pressure in Fuel Line� ...

Side Impact Sensor (SIS) Description and Operation
Description Side Impact Sensor (SIS) system consists of two P-SIS which are installed at each center of the front door module (LH and RH) and two SIS which are installed at each center pillar n ...