Use only the specified service grade engine oil.
✽ NOTICE
Intake Air Temperature Sensor (IATS) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the IATS connector.
3.
Measure resistance between the IATS terminals 3 and 4.
4.
Check that the resistance is within the speci ...
Body Side Moulding Repair procedures
Replacement
Roof Moulding Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related ...
TPMS Receiver. Schematic Diagrams
Circuit Diagram
Connector pin number
Pin NO.
Discription
Remark
1
-
2
-
...