Kia Optima: Removal - RCV Control Solenoid Valve. Repair procedures - Engine Control System - Engine Control/Fuel System - Kia Optima TF 2011-2019 Service ManualKia Optima: Removal

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2. Remove the RCV control solenoid valve (A) after disconnect the connector, bolt and hose.


Inspection
1. Turn the ignition switch OFF. 2. Disconnect the RCV control solenoid valve connector. 3. Measure resistance between the valve terminals 1 ...

Installation
1. Installation is the reverse order of removal. ...

See also:

Steering Angle Sensor. Description and Operation
Description The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power Steering) and it sends messages to HECU through CAN communication line.The SAS is used to determine turning di ...

Tire and loading information label
The label located on the driver's door sill gives the original tire size, cold tire pressures recommended for your vehicle, the number of people that can be in your vehicle and vehic ...

Engine number
2.4 engine 2.0 engine The engine number is stamped on the engine block as shown in the drawing. ...

Copyright © www.kiopman.com 2019