Kia Optima: Mode Control Actuator. Repair procedures - Temperature Control Actuator - Heating,Ventilation, Air Conditioning - Kia Optima TF 2011-2019 Service ManualKia Optima: Mode Control Actuator. Repair procedures

Mode Control Actuator. Description and Operation
Description The mode control actuator is located at the heater unit.It adjusts position of mode door by operating mode control actuator based on signal of A/C control unit. Pressing mode select s ...

Inspection
1. Ignition "OFF” 2. Disconnect the connector of mode control actuator. 3. Verify that the mode control actuator operates to the defrost mode whe ...

See also:

Installation
Pressure Side Impact Sensor 1. Install the new pressure side impact sensor with the screws then connect the pressure side impact sensor connector. Tightening t ...

Removal
Brake Booster 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the air duct (B) and air cleaner assembly (A). ...

Replacement (With EPB)
Rear brake pads 1. Remove the rear wheel & tire. 2. Connect the GDS to the data link connector located underneath the dash panel. 3. Ignition "ON& ...

Copyright © www.kiopman.com 2019