Kia Optima: Installation - Fob Holder. Repair procedures - Button Engine Start System - Body Electrical System - Kia Optima TF 2011-2019 Service ManualKia Optima: Installation

1. Install the fob holder.
2. Install the glove box.

Removal
1. Disconnect the negative(-) battery terminal. 2. Remove the glove box.(Refer to the BD group - "Crash pad") 3. Disconnect the fob hold ...

Ignition Switch Assembly
...

See also:

Replacement
1. Disconnect the negative (-) battery terminal. 2. Loosen the mounting screw and then remove the crash pad lower cover (A). 3. Remove the eva ...

Inspection
In the state of IGN1 ON, when multi function switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto light sensor's i ...

Installation
1. Installation is the reverse of removal. 2. Use a SST (09581-11000) when installing the brake caliper assembly. 3. After installation, bleed ...

Copyright © www.kiopman.com 2019