Kia Optima: Installation
| 1. | Install the cluster to the cluster housing. |
| 2. | Install the cluster fascia panel and crash pad side garnish [LH]. |
| 3. | Install the crash pad lower pannel and side cover. |
| 4. | Install the side pad garnish [RH]. |
Removal
•
Take care not to scratch
the center fascia panel and related parts.
•
Eject all the ...
Trip Switch. Schematic Diagrams
Circuit Diagram
...
See also:
If engine stalls while driving
1. Reduce your speed gradually, keeping
a straight line. Move cautiously off the
road to a safe place.
2. Turn on your emergency flashers.
3. Try to start the engine again. If your
vehicle wil ...
Safety Belt Warning Chime
If the driver's lap/shoulder belt is not fastened when the key is turned ON or
if it is unfastened after the key is turned ON, safety belt warning chime sounds
for approximately 6 seconds. ...
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Disconnect the manifold absolute pressure sensor
connector (A).
...
Copyright © www.kiopman.com 2024