Replacement
1. | Disconnect the negative (-) battery terminal. |
2. | Remove the steering column upper
and lower shrouds after loosening the screws (3EA).
|
3. | Disconnect the 6P connector (B)
of the coil antenna and then remove the coil antenna (A) after loosening
the screw.
|
4. | Installation is the reverse of removal procedure. |
Manual Transaxle Operation
The manual transaxle has five forward gears. Press the clutch pedal down fully
while shifting, then release it slowly.
A special safety feature prevents inadvertent shifting from 5 (Fifth) to R ( ...
Body Side Moldings. Repair procedures
Replacement
Roof Molding Replacement
•
When prying with a flat-tip
screwdriver, wrap it with protective tape, and ...
Auto Light Switch. Repair procedures
Inspection
Lighting Switch InspectionWith the multi function switch in each position, make
sure that continuity exists between the terminals below. If continuity is not as
specified, replace the ...