Kia Optima: Installation - Relay Box (Passenger Compartment). Repair procedures - Fuses And Relays - Body Electrical System - Kia Optima TF 2011-2026 Service ManualKia Optima: Installation

1. Install the smart junction box.
2. Install the crash pad lower panel.
3. Check that all system operates normally.

Removal
Passenger Compartment Junction Box (SJB) 1. Disconnect the negative(-) battery terminal. 2. Remove the crash pad lower panel (A).(Refer to the BD group - "Crash p ...

The Other Fuses And Relays Component. Repair procedures
Inspection Power Relay Test (Type B)Check for continuity between the terminals. A : Two turn unlock relay 1. There should be continuity between the No.30 and No.87 terminals when power ...

See also:

Armed stage
The Theft-Alarm system is armed as follows. • After all doors, engine hood, and trunk are locked, press the “LOCK” button on the transmitter once. The hazard flasher lights will flash once ...

Smart key unit. Schematic Diagrams
Circuit Diagram ...

Window opening and closing
Type A The driver’s door has a master power window switch that controls all the windows in the vehicle. To open or close a window, press down or pull up the front portion of the corresponding ...

Copyright www.kiopman.com 2026