Kia Optima: Installation - Power Seat Control Switch. Repair procedures - Seat Electrical - Body Electrical System - Kia Optima TF 2011-2020 Service ManualKia Optima: Installation

- Make sure that the IMS control switch connectors and related connectors are plugged in properly.
- Check the IMS control switch operates normally.
1. Connect the connectors and reassemble the IMS control switch.
2. Reassemble the seat side cover.

Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the seat control switch (A). 3. Remove the seat side cover (A). (Refer to the BD ...

Seat Heater Switch. Schematic Diagrams
Circuit Diagram ...

See also:

26 Brake Control Solenoid Valve(26/B_VFS). Description and Operation
Description 26 brake control solenoid valve(26/B_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 26 brake. ...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the engine coolant temperature sensor connector (A). ...

Operation of the rear parking assist system
Operating condition This system will activate when backing up with the ignition switch ON. The sensing distance while the rear parking assist system is in operation is approximately 120 cm (4 ...

Copyright © www.kiopman.com 2020