Kia Optima: Installation - Brake Line. Repair procedures - Brake System - Brake System - Kia Optima TF 2011-2019 Service ManualKia Optima: Installation

1. Installation is the reverse of removal.
Use a new washer (A) whenever installing.

2. After installation, bleed the brake system. (Refer to Brake system bleeding)
3. Check the spilled brake oil.

Inspection
1. Check the brake tubes for cracks, crimps and corrosion. 2. Check the brake hoses for cracks, damage and fluid leakage. 3. Check the brake tube flar ...

Brake Pedal. Components and Components Location
Components 1. Cowl bracket 2. Brake pedal member assembly 3. Stop lamp switch 4. Return spring 5. Brake pedal stopper 6. Clevis pin 7. Snap pin 8. Brake pe ...

See also:

Components (2)
1. Backing plate 2. Operating lever 3. Upper spring 4. Lower spring 5. Adjuster 6. Shoe hold down spring 7. Shoe hold down pin 8. Shoe ...

Rail Pressure Sensor (RPS). Schematic Diagrams
Circuit Diagram ...

Adjustment
Stop lamp switch clearance adjustment If the gap between stop lamp switch and bracket is not 1.0 ~ 2.0mm(0.04~ 0.08in), conform to below. 1. Disconnect the stop lamp switch ...

Copyright © www.kiopman.com 2019