Kia Optima: Installation - Brake Booster. Repair procedures - Brake System - Brake System - Kia Optima TF 2011-2019 Service ManualKia Optima: Installation

Brake Booster

1. Installation is the reverse of removal.
Before installing the pin, apply the grease to the joint pin.
Use a new snap pin whenever installing.
2. Adjust the brake pedal height and free play.

(Refer to Brake pedal height and free play adjustment)

Vacuum Pump
1. Installation is the reverse of removal.
2. Tighten the vacuum pump mounting bolts to the specified torque.

Inspection
Brake Booster 1. Inspect the check valve in the vacuum hose, intensifier and the connecting section. ...

Master Cylinder. Components and Components Location
Components 1. Reservoir cap 2. Reservoir 3. Grommet 4. Master cylinder ...

See also:

Suspension System. Tires/Wheels. Tire. Repair procedures
Tire wear 1. Measure the tread depth of the tires. Tread depth [limit] : 1.6 mm (0.063 in.) 2. If the remaining tread depth (A) is less ...

Child restraint anchorage position
Your vehicle is equipped with an anchor for securing the tether strap of a child restraint system (child seat). The child restraint anchor fittings are installed on the shelf behind the rear se ...

Removal
1. Remove the timing chain. (Refer to Timing system in this group) 2. Install a stopper pin (A) after compressing the balance shaft chain tensioner. 3. ...

Copyright © www.kiopman.com 2019