Kia Optima: Installation - Shift Lever. Repair procedures - 35R Clutch Control Solenoid Valve(35R/C_VFS). Description and Operation - Automatic Transaxle System - Kia Optima TF 2011-2019 Service ManualKia Optima: Installation

1. Installation is the reverse of removal.
Make sure vehicle does not roll before setting room side shift lever and T/M side manual control lever to "N" position.

Removal
Shift Lever Assembly Replacement 1. Remove the center console assembly. (Refer to "Interior(console)" in BD group.) 2. Disconnect sports mode conn ...

Adjustment
Adjusting method for T/M control cable 1. Make sure vehicle does not roll before setting room side shift lever and T/M side manual control lever to "N" pos ...

See also:

Removal and Installation
1. Loosen the drain plug, and then drain the engine coolant. Remove the radiator cap to drain with speed. 2. Remove the drive belt (A) after turning the drive belt te ...

To resume cruising speed at more than approximately 40 km/h (25 mph)
If any method other than the cruise ON/OFF switch was used to cancel cruising speed and the system is still activated, the most recent set speed will automatically resume when the RES+ switch is ...

Hands Free Switch. Schematic Diagrams
Circuit Diagram ...

Copyright © www.kiopman.com 2019