1. | Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdriver or pliers. |
2. | Check the condenser connections for leakage, and repair or replace it, if required. |
To increase cruise control set speed
Follow either of these procedures:
Move the lever (1) up (to RES+) and hold it. Your vehicle will accelerate.
Release the lever at the speed you want.
Move the lever (1) up (to RES+) and re ...
Inspection
1.
Measure terminal-to-terminal
resistance of the blower resistor.
2.
measured resistance is not within
specification, the blower resistor must be replaced. (After re ...
Headlight escort function
The headlights (and/or taillights) will remain on for approximately 20 minutes
after the ignition key is removed or turned to the ACC or LOCK position. However,
if the driver’s door is opened and ...