Kia Optima: Inspection - Rear Assist Arm. Repair procedures - Rear Suspension System - Suspension System - Kia Optima TF 2011-2020 Service ManualKia Optima: Inspection

1. Check the bushing for wear and deterioration.
2. Check for all bolts and nut.

Replacement
1. Remove the rear wheel & tire. Tightening torque:88.3 ~ 107.9 N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

Trailing Arm. Repair procedures
Replacement 1. Remove the rear wheel & tire. Tightening torque:88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

See also:

Placing a passenger seat belt into the auto lock mode
The auto lock mode will help prevent the normal movement of the child in the vehicle from causing the seat belt to loosen and compromise the child restraint system. To secure a child restraint s ...

Electric WGT Control Actuator. Components and Components Location
Components 1 . Housing 2 . Cover 3. Sealing Cover 4 . Motor 5. Pinion 6 . Shaft Gear 7 . PCB Assembly 8 . Middle Gear 9 . Lever 10 . Lever Pin 11 ...

Inspection
TCM Problem Inspection Procedure 1. TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis ground using the backside of TCM harness connector as TCM side check point. If ...

Copyright © www.kiopman.com 2020