Kia Optima: Inspection - Input Speed Sensor. Repair procedures - Automatic Transaxle Control System - Automatic Transaxle System - Kia Optima TF 2011-2021 Service ManualKia Optima: Inspection

1. Check signal waveform of Input & output speed sensor using the GDS.

Specification: Refer to "Signal Wave Form" section.

Input Speed Sensor. Repair procedures
...

Removal
1. Remove the battery and the battery tray. (Refer to "Charging system" in EE group.) 2. Remove the under cover (A). Tightening torque:7.8 ~ 11 ...

See also:

Cleaning
1. Make sure the ignition switch and all accessories are in the OFF position. 2. Disconnect the battery cables (negative first). 3. ...

Rear Hub - Carrier Components and Components Location
Components 1. Rear carrier assembly2. Parking brake assembly3. Rear hub assembly4. Rear brake disc ...

Front Stabilizer Bar Repair procedures
Replacement 1. Remove the front wheel & tire. Tightening torque: 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1~79.6lb-ft)     Be careful not to damage to the hub bolts ...

Copyright © www.kiopman.com 2021