1. | Connect the GDS on the Data Link Connector (DLC). |
2. |
Measure the output voltage of the FTPS.
|
Inspection
1.
Immerse the thermostat in water
and gradually heat the water.
2.
Check the valve opening temperature.
Valve opening temperature:
82 ± 1.5°C (17 ...
Components and Components Location
Components
1. HECU module
2. Front wheel speed sensor
3. Rear wheel speed sensor
4. Yaw rate & Lateral G sensor
5. Steering angle sensor
6. ABS Warning lamp
...
Inspection
1.
Ignition "OFF”
2.
Disconnect the connector of mode
control actuator.
3.
Verify that the mode control
actuator operates to the defrost mode whe ...