Kia Optima: Front Impact Sensor (FIS). Components and Components Location - SRSCM - Restraint - Kia Optima TF 2011-2020 Service ManualKia Optima: Front Impact Sensor (FIS). Components and Components Location

Components


Front Impact Sensor (FIS). Description and Operation
Description The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primary pur ...

Front Impact Sensor (FIS). Repair procedures
...

See also:

Purge Control Solenoid Valve (PCSV) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the PCSV connector. 3. Measure resistance between the PCSV terminals 1 and 2. 4. Check that the resistance is within the speci ...

Checking the engine oil level
2.4 engine 2.0 engine 1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few min ...

Front Fog Lamps Repair procedures
Inspection 1. Disconnect the negative(-) battery terminal. 2. Remove the lighting switch of the multi-function switch. (Refer to the multi-function switch) 3. With the front fog lamp switc ...

Copyright © www.kiopman.com 2020