Kia Optima: Exterior - Body (Interior and Exterior) - Kia Optima TF 2011-2020 Service ManualKia Optima: Exterior

Actual-Measurement Dimensions
Front side member tooling hole (Ø25) Side cover mounting hole (Ø9) Side cover mounting ...

Fender. Repair procedures
Replacement Х Be careful not to damage the fender and body. Х When removing the cli ...

See also:

Checking Brake/Clutch Fluid Level
Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN indicators on the side of the reservoir. Before removing the reservoir cap and adding brake flui ...

Installation
Pressure Side Impact Sensor 1. Install the new pressure side impact sensor with the screws then connect the pressure side impact sensor connector. Tightening t ...

Installation
1. Installation is the reverse of removal. 2. Use a SST (09581-11000) when installing the brake caliper assembly. 3. After installation, bleed ...

Copyright © www.kiopman.com 2020