Kia Optima: Components and Components Location - Hydraulic System - Automatic Transaxle System - Kia Optima TF 2011-2019 Service ManualKia Optima: Components and Components Location

Components Location

1. Automatic transaxle
2. Valve body assembly
3. Oil pump assembly


Description and Operation
Description The hydraulic system consists of oil, an oil filter, an oil pump, and a valve body (valves and solenoid valves). The oil pump is powered by the engine. ATF passes through the oil filt ...

Oil Pump. Description and Operation
Description The oil pump is built-in as a single unit with the 26 brake chamber. Rotation of the pump builds the hydraulic pressure needed for the lubrication of the various parts of the transaxl ...

See also:

Adjustment
Inspect Glass Alignment 1. Check for abnormal noise or bending during operation. 2. With the sunroof fully closed, check for water leakage. 3. The roof ...

Checking the washer fluid level
Check the fluid level in the washer fluid reservoir and add fluid if necessary. Plain water may be used if washer fluid is not available. However, use washer solvent with antifreeze charac ...

Muffler > Repair procedures
Removal and Installation 1. Remove the front muffler (B) after disconnecting the oxygen sensor connector (A). Tightening torque:39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ...

Copyright © www.kiopman.com 2019