Kia Optima: Blade inspection - Wiper blades - Maintenance - Kia Optima TF 2011-2021 Owners ManualKia Optima: Blade inspection

✽ NOTICE

✽ NOTICE

Commercial hot waxes applied by automatic car washes have been known to make the windshield difficult to clean.

Contamination of either the windshield or the wiper blades with foreign matter can reduce the effectiveness of the windshield wipers. Common sources of contamination are insects, tree sap, and hot wax treatments used by some commercial car washes. If the blades are not wiping properly, clean both the window and the blades with a good cleaner or mild detergent, and rinse thoroughly with clean water.

To prevent damage to the wiper CAUTION

To prevent damage to the wiper blades, do not use gasoline, kerosene, paint thinner, or other solvents on or near them.

Wiper blades
...

Blade replacement
When the wipers no longer clean adequately, the blades may be worn or cracked, and require replacement. CAUTION To prevent damage to the wiper arms or other components, do not attempt to mo ...

See also:

Disassembly
1. Remove the dust packing & cap (A) from the pinion housing. 2. Loosen the lock nut and then remove the tie rod end (B) and lock nut (A) from the tie rod ...

Engine Oil Pressure Warning
This warning light indicates the engine oil pressure is low. If the warning light comes on while driving: 1. Drive safely to the side of the road and stop. 2. With the engine off, check the engin ...

Rear Wheel Speed Sensor Repair procedures
Removal 1. Remove the rear wheel and tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) 2. Remove the rear wheel speed sensor mounting bolt (A). Tightenin ...

Copyright © www.kiopman.com 2021