Kia Optima: Anchor Pretensioner (APT). Repair procedures - Seat Belt Pretensioner - Restraint - Kia Optima TF 2011-2020 Service ManualKia Optima: Anchor Pretensioner (APT). Repair procedures

Anchor Pretensioner (APT). Components and Components Location
Components ...

Removal
1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. To remove the seat belt anchor pretensioner (C), keep on push ...

See also:

Service Standard
Item Specification Ignition Timing (°) BTDC 6 ± 10 Idle Speed (rpm) A/C OFF Neutral, N, P-range 70 ...

ECM Problem Inspection Procedure
1. TEST ECM GROUND CIRCUIT: Measure resistance between ECM and chassis ground using the backside of ECM harness connector as ECM side check point. If the problem is found, repa ...

Installation
1. Installation is the reverse of removal. 2. Use a SST (09581-11000) when installing the brake caliper assembly. 3. After installation, bleed ...

Copyright © www.kiopman.com 2020