Kia Optima: Accelerator Pedal. Repair procedures

Installation

1. Installation is reverse of removal. Filler-neck assembly bracket installation bolt : 3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft) Filler-neck as ...

Removal

1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the accelerator position sensor connector (A). ...

See also:

Oil Pump. Description and Operation
Description The oil pump is built-in as a single unit with the 26 brake chamber. Rotation of the pump builds the hydraulic pressure needed for the lubrication of the various parts of the transaxl ...

Noise and Smoke
When the air bags inflate, they make a loud noise and they leave smoke and powder in the air inside of the vehicle. This is normal and is a result of the ignition of the air bag inflator. After t ...

Battery replacement
When replacement is necessary, use the following procedure. 1. Using a screwdriver, loosen the screw on the backside of the transmitter then use a thin tool to pry open the transmitter. 2. Disas ...